25k Composite Tension / Suspension Insulator

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage: 25kV
• Specified mechanical load (tensile): 100kN
• Arcing distance: 516mm
• Creepage distance: 1600 mm
• Section length: 840mm
• Lightning impulse withstand voltage (Peak value): 310kV
• Wet 1 min power-frequency withstand voltage (Effective value): 150kV
• Pollution withstand voltage (Under saline density 0.35mg/cm²): 32A

Additional specifications:

• Rated voltage: 3kV
• Creepage distance: 150mm
• Lightning impulse withstand voltage (peak value): 50kV
• Power-frequency withstand voltage (effective value): 23kV
• Approximate net weight: 3.47

25kV Composite Cantilever Insulator

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage 25kV
• Specified mechanical load (bending): 8kN
• Arcing distance 468mm
• Creepage distance: 1600mm
• Section length: 760mm
• Lightning impulse withstand voltage (peak value): 310kV
• Wet 1 min power-frequency withstand voltage (effective value): 150kV
• Pollution withstand voltage (Under saline density 0.35mg/cm²): 32kV
• Approximate net weight: 11.3kg

25kV Composite Cantilever Insulator Of Double Insulation

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage: 25kV
• Specified mechanical load (tensile): 8kN
• Arcing distance: 460mm
• Creepage distance: 1600 mm
• Section length: 1600mm
• Lightning impulse withstand voltage (Peak value): 310kV
• Wet 1 min power-frequency withstand voltage (Effective value): 150kV
• Pollution withstand voltage (Under saline density 0.35mg/cm²): 32A

Additional specifications:

• Rated voltage: 3kV
• Creepage distance: 150mm
• Lightning impulse withstand voltage (peak value): 50kV
• Power-frequency withstand voltage (effective value): 23kV
• Approximate net weight: 13.10kg

25kv Composite Catenary Insulator #1

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage: 25kV
• Specified mechanical load (tensile): 100kN
• Arcing distance: 508mm
• Creepage distance: 1200 mm
• Section length: 738 mm
• Lightning impulse withstand voltage (Peak value): 270kV
• Wet 1min power-frequency withstand voltage (Effective value): 130kV
• Pollution withstand voltage (under saline density 0.35mg/cm²): 32kV
• Approximate net weight: 2.24kg

25kV Composite Catenary Insulator #2

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage: 25kV
• Specified mechanical load (tensile): 100kN
• Arcing distance: 570mm
• Creepage distance: 1600 mm
• Section length: 800mm
• Lightning impulse withstand voltage (Peak value): 310kV
• Wet 1 min power-frequency withstand voltage (Effective value): 150kV
• Pollution withstand voltage (Under saline density 0.35mg/cm²): 32kV
• Approximate net weight: 2.80kg

25kV Composite Orientation Insulator

Features:

• Manufactured by means of injection whole-molding technology
• The juncture between end fitting and core is totally embedded in HTV silicone rubber, eliminating conventional and traditional seal defects

Materials:

• Silicon Rubber for sheds/ housing
• Glass-fiber reinforced epoxy resin rod (ECR type) for core
• Hop dip galvanized cast steel for metal fittings

Electromechanical specifications:

• Rated voltage 25kV
• Specified mechanical load (bending): 4kN
• Arcing distance 320mm
• Creepage distance: 1200mm
• Section length: 480mm
• Lightning impulse withstand voltage (peak value): 250kV
• Wet 1 min power-frequency withstand voltage (effective value): 130kV
• Pollution withstand voltage (under saline density 0.30mg/cm²): 31.5kV
• Approximate net weight: 6.5kg